Tehaha Love it. Ok. Now onto more important things.. lets learn how to make this.
You will need;
Gumpaste – any chosen colour
Piping bag plus tips
Sparkles!!! Or any decorations you want to use, like peacock feathers.
First off, design your mask. It’s always a good idea to have a design idea before going in. I always sketch my designs while surrounded by inspiration. But be flexible, sometimes the best laid plans can go awry. I made two masks, because my first design sucked. Seriously. It sucked hard, kids!
You also need to make a template for your mask. I found a few I liked and made a variation of them.
Trace your template onto some baking paper and cut out. Next you will need to cut your template out of gumpaste, so prepare your bench top with a sprinkling of corn flour and roll your gumpaste to approximately 5mm thick. We want it to be thick and sturdy.
Lay your template over the gumpaste and using a small, sharp knife cut out the mask, leaving the eye holes til last.
You may find that the gumpaste will shift as you are cutting it. No problem, just used your index finger to smooth out and shape the gumpaste so it’s all even. Then proceed to cutting out the eye holes. Now, be patient. Once you put this on the actual mask to dry, you’ll probably have to trim the eyes again to get them even.
Now that you have your mask, you'll want to get that realistic shape. Enter the creepy plastic face mask! So, to stop the gumpaste from sliding off, place a layer or two of cling wrap on the plastic mask. You will also want to raise the plastic mask so the gumpaste mask doesn’t dry with its tips sticking out like a pair of tiny wings. I stuck an upside down bowl under mine, which worked a treat!
Once dry, we start the fun bit.. Decorating! I also took the extra step of trimming my dry mask with a small knife, just to round off the corners and even the whole thing out. You may also want to redo the eye holes.
Assuming that the actual mask won’t be consumed, we’re going to use a bit of led pencil to trace our design on the mask (and honestly, who of us didn’t suck on or chew the living daylights out of some led pencils in primary school? Didn’t hurt me).
Ok so, grab some baking paper and trace the outline of your mask, including the eye hole (don’t use your original template because the shape of the mask will have changed).
Use this to draw your design onto. Once you have finalised it, flip the baking paper over and trace the outline of the design. Then, lay the baking paper over the mask (right side up) and rub over the outline again. This will transfer the led on the back of the baking paper onto your gumpaste. Use this technique to ensure all your design is even and consistent.
Now we have a lovely stencil to pipe over. Fill your piping bag with royal icing, coloured to your choice. I was using very dark green/almost back edible sparkles so I tinted my royal icing black. I also used a round #1 size tip, but use your discretion based on your design. Work in sections so the royal icing doesn’t dry before you sprinkle your decorations on top. If it does dry quickly, just grab a fine paint brush and paint with a little bit of water, then sprinkle your decorations on.
To finish I grabbed some peacock feather which I glued to the back with royal icing. Attach to the cake with more royal icing and voila! One beautiful masquerade birthday cake for a beautiful girl.. Happy Birthday Ashleigh!